Table Of Contents; Description; Safety; Purpose - Greenlee 555C Instruction Manual

Table of Contents

Description ..................................................................... 2
Safety ............................................................................. 2
Purpose .......................................................................... 2
Important Safety Information ...................................... 3-4
Grounding Instructions ................................................... 5
Identification ................................................................... 6
Specifications ................................................................. 6
Bending Attachment Groups .......................................... 7
Setup .............................................................................. 8
Operation ................................................................. 9-11
Illustrated Bending Glossary ........................................ 12
Bending Instructions ............................................... 13-14
Additional Bending Instructions .............................. 15-24
Handle Removal and Replacement ............................. 25
Transportation .............................................................. 25
Maintenance ................................................................. 26
Troubleshooting ..................................................... 27-29
Exploded Views and Parts Lists ............................. 30-33
Schematic Diagram ...................................................... 34
Control Assembly ......................................................... 35
Bending Shoes and Roller Supports ...................... 36-39

Description

The Greenlee 555C Electric Bender Classic is intended
to bend 1/2" to 2" conduit and pipe.
Bending shoe groups are available to accommodate the
following types: Electrical Metallic Tubing, Intermediate
Metallic Conduit, Rigid Conduit, PVC-Coated Rigid
Conduit, and Schedule 40 Pipe. The shoe groups are
shown in the Bending Attachment Groups section of this
manual.
Greenlee / A Textron Company

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.

Purpose

This manual is intended to familiarize personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design improvements
occur. Greenlee Textron Inc. shall not be liable for damages resulting
from misapplication or misuse of its products.
Mobil is a registered trademark of Mobil Oil Corporation.
KEEP THIS MANUAL
2
555C Electric Bender Classic
555C Electric Bender Classic,
with Serial Codes AFB and ADE
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070