Led Error Indication And Failures; Led Indication At Operator Calls - Brother HL-2230 Service Manual

3.

LED ERROR INDICATION AND FAILURES

3.1

LED indication at Operator Calls

Distinguish the contents of error by LED indication in the control panel. See the reference
page and take the corrective action described for each indication to correct it. when the red
Error LED is ON or blinking to indicate it, the printer automatically recovers from most errors.
But some of errors are necessary to reset the printer by holding down the [Go] button.
LED indication of the following table is that
LED is OFF,
LED
Error LED and Ready LED :
Turn on alternately
for 0.5 seconds
Toner On for 2 seconds
:
LED Off for 3 seconds
LED is ON and
Type of error
JOB CANCELING
TONER LOW
REPLACE TONER
CARTRIDGE ERROR
NO TONER
2-9
LED is blinking.
Refer to:
-
4.5.3
4.5.4
4.5.2
4.5.6
Confidential