Configuring Ht-386 With Web Browser; Access The Web Configuration Menu; End User Configuration; Figure 3: Screenshot Ofc - Grandstream Networks HT-386 User Manual

C HT-386
ONFIGURING
The HT–386 has an embedded Web server that will respond to HTTP GET/POST requests. It also has
embedded HTML pages that allow users to configure the HT–386 through a Web browser such as
Microsoft's IE, AOL's Netscape or Mozilla Firefox installed on Windows or Unix OS. (Macintosh OS does
not included).

Access the Web Configuration Menu

First, get the IP address of the HT-386 through section "Configuration" with menu option 02. Then access
the HT-386's Web Configuration Menu using the following URLI:
IP-Address is the IP address of the HT-386.
NOTE:
•
To type IP address into browser to get the configuration page, please strip out the announced
leading "0" as the browser will parse in octet. e.g.: if the IP address reported: 192.168.001.014,
please type in: 192.168.1.14.
E U C
ND SER ONFIGURATION
Once the HTTP request is entered and sent from a Web browser, the user will see a log-in screen. There
are two default passwords for the login page:
User Level:
End User Level
Administrator Level
Only an administrator can access the "ADVANCED SETTING" configuration page. Once this HTTP
request is entered and sent from a Web browser, the HT-386 will respond with the following login screen:
F 3: S
IGURE CREENSHOT OF
Grandstream Networks, Inc.
W B
WITH EB ROWSER
Password:
123
admin
C L -
ONFIGURATION OG
HT-386 User Manual
Firmware 1.0.3.64
http://ATA-IP-Address
Web pages allowed:
Only Status and Basic Settings
Browse all pages
P
IN AGE
where the ATA-
Page 18 of 34
Last Updated: 2/2007