Panasonic KX-TGM460 Operating Instructions Manual page 43

n While another unit is on a landline call:
To join the conversation, press MTALKN.
Base unit
To join the conversation, select the line that is
being used for the call:
– for a cellular line press MCELL 1N or MCELL
2N.
– for the landline press MZN.
Note for handset and base unit:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 60).
Transferring calls,
conference calls
Outside calls can be transferred or a
*1
conference call with an outside party can be
made:
– between 2 handsets
– between a handset and the base unit
*1 A conference call can be established
using the handset only.
Handset
1
During an outside call, press MMENUN.
2
MbN: "Intercom" a MSELECTN
3
MbN: Select the desired unit. a MSELECTN
R If you select "Voice paging", the
call will be switched from the
ear-receiver mode to the
speakerphone mode.
4
Wait for the paged party to answer.
R If the paged party does not answer,
press MBACKN to return to the outside
call.
5
To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: "Conference" a
MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
For assistance, please visit http://shop.panasonic.com/support
Making/Answering Calls
R To put the outside call on hold:
MMENUN a MbN: "Hold" a
MSELECTN
To resume the conference: MMENUN
a MbN: "Conference" a MSELECTN
R To cancel the conference: MMENUN a
MbN: "Stop conference" a
MSELECTN
You can continue the conversation
with the outside caller.
Base unit
1
During an outside call, press MLOCATOR/
INTERCOMN.
R All registered handsets ring.
R The outside call is put on hold.
2
Wait for the paged party to answer.
R If the paged party does not answer,
press MLOCATOR/INTERCOMN to
return to the outside call.
3
To complete the transfer, press MZN.
R The outside call is being routed to the
handset.
Transferring a cellular call
between the unit and a
cellular phone
n From the handset to a cellular phone
1
Press MMENUN during a cellular call.
2
MbN: "Transfer to cell" a
MSELECTN
R The cellular call is transferred to the
cellular phone.
Note:
R Depending on your cellular phone type,
you may need to set the cellular phone
to be ready to talk before transferring.
For example, if your cellular phone has a
top cover, open it beforehand.
n From a cellular phone to the handset
During a conversation using a cellular
phone, the call cannot be transferred to the
handset by the cellular phone. Perform the
following with the handset.
43