5.3.4
Minimum distances
The service spaces to comply with are shown on the dimensional drawings attached to the documentation of the unit.
It is essential to ensure an adequate volume of air on the suction and delivery side of the condensing coil.
It is very important to avoid recirculation between suction and delivery, as this would lower the performance of the unit
or even stop its normal operation.
The presence of very high walls near the unit will impair its correct operation.
Units should be installed a minimum of three metres apart.
It is advisable to leave sufficient space between units to allow their larger components, such as heat exchangers and
compressors, to be removed if necessary.
We reserve the right to make changes without any prior notice.
Translation from original instructions
UATYQ*Y1
Installation manual
25
Packaged Rooftop
4P522680-1