Table of Contents
Advertisement
For the other sizes, the unit should be lifted using only and solely the lifting slings and tubes supplied with it.
To prevent the slings from touching the unit, suitable protective devices must be placed on the upper
edges.
It is mandatory to use a lifting beam adjusted to the width of the unit in order to ensure lifting stability
3.4 Storage
There are no special requirements if the unit has to be stored temporarily before installation.
Since these units are intended for outdoor installation, they withstand normal atmospheric conditions without problem.
The unit must be placed on a flat surface that is suitable for bearing its weight, in order to avoid deformation of the
structure with consequent possible breakage.
We reserve the right to make changes without any prior notice.
UATYQ*Y1
Packaged Rooftop
4P522680-1
Fig. 3 Detail of hooking the sling to the lifting tube
Fig. 4 Lifting with crane
Translation from original instructions
Installation manual
15
Advertisement
Table of Contents
