Table of Contents
Advertisement
WPS
WPS
Product PIN
Push‐Button WPS
WPS by PIN
WPS Security
WPS Status
Wireless 2.4GHz
SSID
Security
Encryption
Check/uncheck this box to enable/disable WPS
functionality. WPS must be disabled when
using MAC‐RADIUS authentication (see
IV‐3‐1‐3‐6 & IV‐3‐4).
Displays the WPS PIN code of the device, used
for PIN code WPS. You will be required to enter
this PIN code into another WPS device for PIN
code WPS. Click "Generate PIN" to generate a
new WPS PIN code.
Click "Start" to activate WPS on the access
point for approximately 2 minutes. This has the
same effect as physically pushing the access
point's WPS button.
Enter the PIN code of another WPS device and
click "Start" to attempt to establish a WPS
connection for approximately 2 minutes.
WPS security status is displayed here. Click
"Release" to clear the existing status.
Displays the SSID name(s) for the specified
frequency.
Displays the security for the specified SSID.
Displays the encryption type for the specified
SSID. See IV‐3. Wireless Settings
47
AP Mode
Advertisement
Table of Contents
