Table of Contents
Advertisement
5.
To change the administrator name and password for the browser based
configuration interface, go to "Management" > "Admin".
6.
Complete the "Administrator Name" and "Administrator Password" fields
click "Apply".
7.
To set the correct time for your access point, go to
and Time".
8.
Set the correct time and time zone for your access point using the drop
down menus. The access point also supports NTP (Network Time Protocol) so
alternatively you can enter the host name or IP address of a time server.
Click "Apply" when you are finished.
"Management" >
17
AP Mode
and
"Date
Advertisement
Table of Contents
