Panasonic PT-EW640 Operating Instructions (Functional Manual) page 64

Note
f When [COLOR ADJUSTMENT] (x page 75) is set to other than [OFF], [COLOR TEMPERATURE] is ixed to [USER].
Adjusting desired white balance
Press as to select [COLOR TEMPERATURE].
1)
2) Press qw or the <ENTER> button.
f The [COLOR TEMPERATURE] individual adjustment screen is displayed.
Press qw button to select [USER].
3)
Press the <ENTER> button.
4)
f The [COLOR TEMPERATURE] screen is displayed.
5)
Press as to select [WHITE BALANCE].
Press the <ENTER> button.
6)
f The [WHITE BALANCE] screen is displayed.
Press as to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].
7)
Press the <ENTER> button.
8)
f The [WHITE BALANCE HIGH] screen or the [WHITE BALANCE LOW] screen is displayed.
Press as to select [RED], [GREEN], or [BLUE].
9)
10) Press qw to adjust the level.
Item
[RED]
[GREEN]
[BLUE]
Note
f Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment
does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the
factory default setting.
f When [COLOR ADJUSTMENT] (x page 75) is set to other than [OFF], [WHITE BALANCE HIGH] cannot be adjusted.
Changing the [USER] name
Press as to select [COLOR TEMPERATURE].
1)
2) Press qw or the <ENTER> button.
f The [COLOR TEMPERATURE] individual adjustment screen is displayed.
Press qw to select [USER].
3)
Press the <ENTER> button.
4)
f The [COLOR TEMPERATURE] screen is displayed.
5)
Press as to select [COLOR TEMPERATURE NAME CHANGE].
Press the <ENTER> button.
6)
f The [COLOR TEMPERATURE NAME CHANGE] screen is displayed.
Press asqw to select the text, and press the <ENTER> button to enter the text.
7)
Press asqw to select [OK], and press the <ENTER> button.
8)
f The name set to color temperature is changed.
64 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
Operation
Deepens red.
Press the w button.
Press the q button. Weakens red.
Deepens green.
Press the w button.
Press the q button.
Weakens green.
Deepens blue.
Press the w button.
Press the q button. Weakens blue.
Adjustment
[WHITE BALANCE HIGH]: 0 - +255 (factory default is
[WHITE BALANCE LOW]: -127 - +127 (factory default is
Range of adjustment
+255)
0)