Panasonic PT-EW640 Operating Instructions (Functional Manual) page 25

13 Connecting terminals (x page 26)
14 Security slot
This security slot is compatible with the Kensington security
cables.
Bottom
Projection direction
18 Burglar hook port
Attaches a burglar prevention cable, etc.
19 Luminance sensor (x page 66)
Attention
f Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel
Power standby <v/b> button
1
Sets the projector to the state where the projector is switched
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in the projection mode. Also starts
projection when the power is switched off (standby mode).
2 <MENU> button
Displays or hides the main menu. (x page 57)
Returns to the previous menu when a sub-menu is displayed.
If you press the <MENU> button on the control panel for at least
three seconds while the on-screen display is off (hidden), the
on-screen display is turned on.
<VOL-> button/<VOL+> button
3
Adjusts the volume of audio output. (x page 52)
Chapter 1 Preparation — About your projector
18
1
2
3
4
15 Air intake port
16 Air ilter cover
The air ilter unit is inside.
17 Control panel (x page 25)
Top
19
20
20 Lens release button (x page 38)
21 Lamp cover
The lamp unit is inside.
5
6
3
7
8
<SHUTTER> button/<AV MUTE> button
4
(<SHUTTER> button for PT-EZ580, PT-EW640 and PT-EX610;
<AV MUTE> button for PT-EW540 and PT-EX510.)
Used when temporarily turning off the image and audio.
(x page 51)
5 <INPUT> button
Switches the input signal to project. (x page 51)
<ENTER> button
6
Determines and executes an item in the menu screen.
<LENS> button
7
Adjusts the focus, zoom, and shift (position) of the lens.
asqw buttons
8
Used to select items in the menu screen, change settings, and
adjust levels.
Also used to enter a password in [SECURITY] or enter
characters.
21
ENGLISH - 25