GoVideo DV2150 User Manual page 43

Troubleshooting
SYMPTOM
Picture from external input is
distorted
Some channels are skipped over
when using CH 
Picture or sound of broadcasting
channel is weak or missing.
Camcorder image via AV input
to DVD+VCR is not shown on TV
screen.
Cannot record or did not record
successfully.
Timer Recording does not work.
Stereo Audio Recording and/or
Playback not present.
Remote control does not work
properly.
Disc Menu, Angle, Subtitle and/or
Audio functions do not work.
Poor quality VHS playback.
(continued)
CAUSE
The video signal from the external
device is copy-protected.
The skipped channels were deleted
with the Add/Remove feature.
Antenna or cables are loose.
Wrong TV Signal is selected in the
DVD+VCR Setup menu.
Camcorder is off.
DVD+VCR's input is not set to Video 1
or Video 2.
The source you are trying to record is
copy- protected.
When setting the recording channel,
the channel is tuned to the TV's own
tuner.
DVD+VCR is not set to the correct
time.
Timer has been programmed
incorrectly.TIMER indicator light does
not appear after programming timer.
TV is not Stereo-compatible.
Broadcast program is not in stereo
format.
DVD+VCR AV Out jacks are not
connected to TV AV In jacks.
DVD+VCR Audio/Video Out is not
selected for viewing at the TV.
The remote control is not pointed at
the remote sensor of the DVD+VCR.
The remote control is too far from the
DVD+VCR.
There is an obstacle in the path of the
remote control and the DVD+VCR.
The batteries in the remote control
are dead.
The remote is in the incorrect mode.
Not all discs include these features.
The VCR heads are dirty.
SOLUTION
Connect the device directly to your
TV.
See "Add/Remove Channels" on page
23.
Tighten connections or replace cable.
See "Signal Type" on page 24.
Turn camcorder on and operate
properly.
Press TV VIEW to select the correct
input.
You cannot record the source.
Select the channel on the DVD+VCR's
built-in TV tuner.
Set date and time; see page 22.
Reprogram Timer; see page 39.
No solution.
No solution.
Make AV connections. Stereo is
available only via AV output from
DVD+VCR.
Select AUX or AV source as TV input.
Point the remote control at the
remote sensor of the DVD+VCR.
Operate the remote control within
23 ft (7 m).
Remove the obstacle.
Replace the batteries with new ones.
Press DVD for DVD control. Press VCR
for VCR control.
No solution.
Use a head cleaner to clean the VCR
heads.
5 - Help
43