Photo Burst Mode; Timelapse Photo Mode - GoPro HD HERO2 User Manual

UsInG yoUr HD Hero2: caMera MoDes

pHoto BuRst moDE

In Photo Burst Mode, the camera will take 10 photos in 1 second.
• Verify the camera is in Burst Mode, indicated by
If not, press repeatedly until the camera displays the Burst Mode icon.
• Press and release once to take a photo burst of ten photos over one
second. The LED Recording Light will flash and the camera will beep 10
times to indicate the photos have been taken.
As in Photo Mode, the LCD screen will display your currently
selected photo resolution (11MP, 8MP or 5MP), the number of
photos stored on your SD card, and the number of photos that
can be taken before the card is full.
pRo Compared to single Photo Mode, Burst Mode gives you 10
tip: times as many chances to capture that "can't miss" moment.
14
on the LCD screen.
UsInG yoUr HD Hero2: caMera MoDes
timE lApsE pHoto moDE
Time Lapse Photo Mode is used to take a series of photos at 0.5, 1, 2, 5, 10,
30 or 60 second intervals (when using 0.5 seconds, it is recommended to use a
class 10 or higher SD card).
‣ See timE lApsE pHoto moDE in advanced settings for instructions on how
to change the interval setting.
• Verify the camera is in Time Lapse Mode, indicated by
screen. If not, press repeatedly until the camera displays the Time
Lapse Mode icon.
• Press the button once to begin taking Time Lapse photos. The LED
Recording Light will flash each time a photo is taken.
• Press once to stop taking Time Lapse photos. The LED Recording Light
will flash three times and the camera will emit three beeps to indicate Time
Lapse has stopped.
As in Photo Mode, the LCD screen will display your currently
selected photo resolution (11MP, 8MP or 5MP), the number of
photos stored on your SD card, and the number of photos that
can be taken before the card is full.
on the LCD
15