Recording Video; Taking Single Photos - GoPro HD HERO2 User Manual

UsInG yoUr HD Hero2: caMera MoDes

REcoRDing viDEo

Verify that the camera is in Video Mode, indicated by
repeatedly until the camera displays the Video Mode icon.
• To begin recording video:
Press and release . The camera will emit one beep and the LED
Recording Light will flash while recording continues.
• To stop recording:
Press and release . The LED Recording Light will flash three times and
the camera will emit three beeps to indicate recording has stopped.
HD HERO2 will automatically stop recording when either the SD card is full or the
battery runs out of power. Your video will be saved before the camera powers off.
While recording video, the LCD will display the currently selected
video resolution, lens field of view (FOV), the elapsed time of the
current recording, and the remaining recording time determined
by the free space on your SD card.
When recording is stopped, the LCD shows the number of video
files stored on the SD card in place of the elapsed recording time.
When the camera is set to One Button Mode, hold
two seconds to enter the Settings
pRo
quickly turn OFF One Button Mode.
tip:
‣ See onE Button moDE for more information.
12
on the LCD. If not, press
for
screen, where you can
UsInG yoUr HD Hero2: caMera MoDes

tAking singlE pHotos

Verify that the camera is in Photo Mode, indicated by
repeatedly until the camera displays the Photo Mode icon.
to take a photo:
Press and release . The camera will beep once and the LED
Recording Light will flash once to indicate a photo has been taken.
in photo mode:
The LCD screen will display your currently selected photo
resolution (11MP, 8MP or 5MP), the number of photos stored on
your SD card, and the number of photos that can be taken before
the card is full.
If you think your SD card will fill up before you are able to
transfer your files, select the 5MP option under the Photo
pRo
settings menu. 5MP files are smaller than 11MP files,
tip:
allowing your SD card to store more photos.
‣ See pHoto REsolution moDEs for more information.
on the LCD. If not, press
13