Table of Contents
Advertisement
S
P
CAN
ROGRAMMING
Note: Scan programming is only available when using Conventional operation.
Using the key programmed as Scan Program, you are able to reprogram your
scan list.
1 Press the key programmed as Scan Program.
• The
(KCH-14 ) or
2 Press the GRP
and channel you will add to or remove from the Scan list.
• Press the PF 4 key to toggle between Zone Select and Channel Select.
3 Press the PF 2 key to add or remove the selected zone or channel to/ from the
scan list.
• The channel add indicator (KCH-14:
appear on the display when the selected channel is added to the scan sequence.
If the Priority channel has been set as Operator Selectable by your dealer, you
are able to reprogram the Priority mode as well.
1 Press the key programmed as Scan Program.
• The
(KCH-14) or
2 Press the GRP
and channel you will add to or remove from the Scan list.
• Press the PF 4 key (the forth key from the left, after the CH control) to toggle
between Zone Select and Channel Select.
3 Press the PF 3 key.
4 Press the PF 4 key to toggle the selected channel between Priority mode and
Normal mode.
•
"P1", "P2", or "PP" appears on the sub-display when Priority mode is
selected.
5 Press the PF 3 key again to set the new channel setting.
SCAN
(KCH-15) icon appears on the display and blinks.
and
keys or rotate the CH control to select the zone
SCAN
(KCH-15) icon appears on the display and blinks.
and
keys or rotate the CH control to select the zone
/ KCH-15:
) will
17
Advertisement
Table of Contents
