Table of Contents
Advertisement
Your transceiver operations vary according to the functions that your dealer
has programmed onto the transceiver keys. Following is brief overview of the
programmable functions. Refer to those functions which have been programmed
onto your transceiver.
•
2-tone
Press this key to display the list of 2-tone codes that has been pre-stored in
your transceiver memory. While viewing the 2-tone list, press the GRP
and
keys or rotate the CH control to select your desired code, then press
the PTT switch to make the call.
•
Auto Reply Message
Refer to "A
UTO
•
Autodial
Refer to "A
UTODIAL
•
AUX A
Press this key to activate the Auxiliary A port on the transceiver. When
activated, the
•
AUX B
Press this key to activate the Auxiliary B port on the transceiver. When
activated, the
•
AUX C
Press this key to activate the Auxiliary C port on the transceiver. When
activated, the
display.
•
Channel Down
Press this key to decrease the channel number {page 12}.
•
Channel Recall
Press this key during Scan to return to the last called zone and channel.
•
Channel Select
Using the CH control, turn clockwise to increase the channel number and
counterclockwise to decrease the channel number {page 12}.
•
Channel Up
Press this key to increase the channel number {page 12}.
•
Clock
Refer to "CLOCK" on page 29.
•
Direct Channel 1 ~ 5
Press 1 of these 5 keys to jump to a frequently used zone and channel (pre-
programmed by your dealer). If activated by your dealer, you can set your own
Direct Channels by selecting your desired zone and channel, then pressing
and holding the Direct Channel 1 ~ Direct Channel 5 key for 3 seconds.
30
ADVANCED OPERATIONS
R
M
" on page 38.
EPLY
ESSAGE
" on page 22.
(KCH-14) or
(KCH-15) icon appears on the display.
A
(KCH-14) or
(KCH-15) icon appears on the display.
B
(KCH-14) or
(KCH-15) icon appears on the
C
Advertisement
Table of Contents
