Table of Contents
Advertisement
Adjusting More Picture Settings
To adjust more picture settings:
1. From the PICTURE menu, use the
More Picture
Arrow buttons to highlight More
Picture, and then press OK.
Color Temperature
Black Detail
2. Use the Arrow buttons to
Xtreme Black Engine Pro™
highlight the setting you wish
Reduce Judder
to adjust, then press the Left/
Right Arrow buttons to change
Reduce Motion Blur
the setting:
Clear Action
•
Color Temperature -
Reduce Noise
See Adjusting the Color
Game Low Latency
Temperature.
Film Mode
•
Black Detail - Adjusts the
Color Space
average brightness of the
Gamma
picture to compensate for
large areas of brightness.
Select Off, Low, Medium, or
High.
•
Xtreme Black Engine Pro™ - Based on the content,
dynamically adjusts and balances the brightness and the
contrast ratio of the picture by locally adjusting backlight
zones.
•
Reduce Judder - Increases frame rate to reduce judder for
film and 30 hertz video. As the setting increases, judder is
reduced.
•
Reduce Motion Blur - Increases frame rate to reduce
motion blur of 60 hertz video. As the setting increases,
motion blur is reduced.
•
Clear Action - Reduces blur in scenes with fast action but
limtis the range for the Backlight setting.
•
Reduce Noise - Opens a sub-menu with two settings:
•
Reduce Signal Noise - Diminishes artifacts in the
Back
image caused by the digitizing of image motion content.
Select Off, Low, Medium, or High.
Normal
•
Reduce Block Noise - Reduces pixelation and distortion
Off
for mpeg files. Select Off, Low, Medium, or High.
Low
•
Game Low Latency - Select On to reduce video delay (lag)
5
when gaming.
5
•
Film Mode - Optimizes the picture for watching film. Select
Off
Auto or Off.
•
Color Space - Select Color Space for the source. Video
Off
sources uses YCbCr, but PC uses RGB.
On
Auto
•
Gamma - Set the shape of the Gamma curve. Use lower
Gamma values for bright room conditions, and higher
2.1
values when it's dark.
3. When you have finished adjusting More Picture Settings, press the
Exit button on the remote.
Adjusting the Color Temperature
Adjusting the color temperature changes the white balance of the
picture.
To adjust the color temperature:
Color Temperature
1. From the MORE PICTURE menu,
use the Arrow buttons to
highlight Color Temperature,
and then press OK.
2. Use the Arrow buttons on the
remote to highlight a color
temperature preset and then
press OK.
•
Normal is optimized for
television viewing.
•
Cool produces a blue-hued
picture.
•
Computer optimizes the
picture for use as a
PC monitor.
3. When you have finished adjusting the color temperature,
press the Exit button on the remote.
3
Back
Normal
Cool
Computer
15
Advertisement
Table of Contents
