Olympus IM002 Instruction Manual page 68

I/H (Underwater wide/
Underwater macro)
2
F (Exposure
compensation)
b (Digital Tele-converter)
D (Keystone Comp.)
U (Magnify)
HDR
BKT
kISO/jWB
kWB/jISO
Multi Function
Peaking
V Level Disp
u (u View Selection)
n (S-OVF)
68 EN
When using a waterproof protector, press the button to
switch between I and H. Press and hold the button
to return to the original shooting mode. When using a
lens with an electronic zoom, switching between I and
H is automatically set to the wide-angle setting and the
telephoto setting.
Press the button to adjust exposure compensation.
If you press the button while in P, A, or S modes, you can
adjust exposure compensation with the dial or HI.
If you press the button while in M mode, you can change
the shutter speed and aperture value with the dial or
FGHI.
Press the button to turn digital zoom [On] or [Off].
Press the button once to display options for keystone
compensation and again to save changes and exit. To
resume normal photography, press and hold the button.
Press the button to display the magnifi cation frame and
press it again to magnify the image. Press and hold the
button to cancel magnifi ed display.
Press the button to switch to HDR shooting with the saved
settings. Press the button again to cancel HDR shooting.
You can switch the HDR mode by rotating the dial while
pressing the button.
Press the button to switch to BKT shooting with the saved
settings. Press the button again to cancel BKT shooting.
You can switch the BKT mode by rotating the dial while
pressing the button.
Press the button to adjust ISO sensitivity using the front
dial and white balance using the rear dial.
Press the button to adjust white balance using the front dial
and ISO sensitivity using the rear dial.
To recall the selected multi function, press the button to
which [Multi Function] has been assigned. g "Using
multi function options (Multi Function)" (P. 70)
Press the button to turn on and off the peaking display.
When peaking is displayed, histogram and highlight/
shadow display are not available.
When using peaking, you can change colors and emphasis
by pressing the INFO button.
Press the button to display the level gauge in the
viewfi nder and press it again to turn off the level gauge.
The level gauge is available when [Style 1] or [Style 2] is
set in [EVF Style] (P. 133).
Press this button to turn on and off the live view. If the eye
sensor is disabled, it switches between monitor display and
EVF display.
Press the button to display an image in the viewfi nder as
an optical viewfi nder image.
viewfi nder. Press the button to end [S-OVF].
will be displayed in the