Supero SC835TQ User Manual page 42

SC835 Chassis Manual
Installing a Hard Drive into the Drive Carrier
1. Remove the two screws securing the dummy drive to the drive carrier.
2. Lift the dummy drive out of the drive carrier.
Drive Carrier
Release Button
Figure 5-3. Removing the Dummy Drive from the Carrier
Note: Only enterprise level hard disk drives are recommended. For recommended
HDDs, visit the Supermicro Web site at http://www.supermicro.com/products/nfo/files/
storage/SAS-1-CompList-110909.pdf.
1
5-4
2
1 1