Philips D605 Series Extended User Documentation page 37

From the handset
Select [Menu] > > [Play], then press [OK]
to confirm.
» New messages start playing. Old
messages start playing if there is no
new message.
Press [Back] to stop listening.
•
• Press [Option] to enter the options menu.
• Press / to increase/decrease the
volume.
Delete an incoming message
From the base
Press when you listen to the message.
» The current message is deleted.
From the handset
1
When you listen to the message, press
[Option] to enter the options menu.
2
Select [Delete], then press [OK] to
confirm.
» The current message is deleted.
Delete all old incoming messages
From the base
Press and hold in standby mode.
» All old messages are permanently
deleted.
From the handset
1
Select [Menu] >
press [OK] to confirm.
» The handset displays a confirmation
request.
2
Press [OK] to confirm.
» All old messages are permanently
deleted.
Note
•
You can only delete the read messages. No deleted
messages can be recovered.
> [Delete all], then
Call screening
You can hear the caller while he is leaving a
message. Press to answer the call.
Note
•
The speaker volume level during call screening is fixed.
Set the sound quality of the message
You can adjust the sound quality of the
messages received from the answering machine.
1
Select [Menu] >
press [OK] to confirm.
2
Select the new setting, then press [OK] to
confirm.
» The setting is saved.
Note
•
The sound quality can only be adjusted before
recording starts.
Set the ring delay
You can set the number of times the phone
rings before the call goes to the answering
machine.
1
Select [Menu] >
press [OK] to confirm.
2
Select a new setting, then press [OK] to
confirm.
» The setting is saved.
Note
•
Make sure that the answering machine is switched on
before this feature can be applied.
> [Msg quality], then
> [Ring delay], then
EN 35