Gigabyte GA-VT890P User Manual page 62

D. Serial Number View:
Highlight Serial Number View and press ENTER. Use the ARROW keys to select a drive, and the
selected drive's serial number can be viewed at the bottom line (Figure 11). The serial number is
assigned by the disk drive manufacturer .
Create Array
Delete Array
Select Boot Array
Create/Delete Spare
Expand Span (JBOD) Array
Serial Number View
Dev. Posi.
Ctrl0 Chnl0 Master
Ctrl0 Chnl1 Master
Serial Number: 3JT329JX
E. Delete Array:
If you want to delete an existing array, select Delete Array in Main Menu and press ENTER. Press
ENTER on the array to be deleted. A warning message will show up, press Y to confirm or press N to
cancel (Figure 12).
Create Array
Delete Array
Select Boot Array
Create/Delete Spare
Expand Span (JBOD) Array
Serial Number View
Data on the raid will be destroyed.
Continue? (Y/N)
Array No. Array Type
Array 0 Stripe
Ctrl0 Chnl0 Master
Ctrl0 Chnl1 Master
Deleting a disk array will destroy all the data on the disk array except for RAID 1 array(s). When a RAID
1 array is deleted, the data on the two hard drives will be reserved and the two hard drives will become
two normal drives.
GA-VT890P Motherboard
VIA Tech. RAID BIOS Utility
Drive Name Array Name
ST3120026AS Array0
ST3120026AS Array0
Figure 11
VIA Tech. RAID BIOS Utility
Stripe/Block Size
64K
ST3120026AS
ST3120026AS
Figure 12
- 62 -
View the serial number of
hard disks, it is userful for
identify same model disks.
F1 : View Array/disk Status
, : Move to next item
Enter : Confirm the selection
ESC : Exit
Mode Size(GB)
SATA 111.79
SATA 111.79
Delete a RAID array contain
the hard disks attached to
VIA RAID controller
F1 : View Array/disk Status
, : Move to next item
Enter : Confirm the selection
ESC : Exit
Cap. (GB)
223.58
111.79
111.79
Status
Stripe0
Stripe1
Status
Normal
Stripe0
Stripe1