Table of Contents
Advertisement
HDD S.M.A.R.T. Capability
This feature allows your hard disk to report read/write errors and to issue warnings when third-
party hardware monitor utility is installed.
Enabled
Enable HDD S.M.A.R.T. capability.
Disabled
Disable HDD S.M.A.R.T. capability. (Default value)
CPU Hyper-Threading
Enabled
Enable CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported.
(Default value)
Disabled
Disable CPU Hyper Threading.
Limit CPUID Max. to 3
Enabled
Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled
Disable CPUID Limit for windows XP. (Default value)
No-Execute Memory Protect
Enabled
Enable No-Execute Memory Protect function. (Default value)
Disabled
Disable No-Execute Memory Protect function.
CPU Enhanced Halt (C1E)
Enabled
Enable CPU Enhanced Halt (C1E) function. (Default value)
Disabled
Disable CPU Enhanced Halt (C1E) function.
CPU Thermal Monitor 2 (TM2)
Enabled
Enable CPU Thermal Monitor 2 (TM2) function. (Default value)
Disabled
Disable CPU Thermal Monitor 2 (TM2) function.
CPU EIST Function
Enabled
Enable CPU EIST function. (Default value)
Disabled
Disable EIST function.
Virtualization Technology
Enabled
Enable Virtualization technology function. (Default value)
Disabled
Disable this function.
(Note) This item will show up when you install a processor which supports this function.
(Note)
(Note)
(Note)
(Note)
(Note)
(Note)
(Note)
- 33 -
BIOS Setup
Advertisement
Table of Contents
