Table of Contents
Advertisement
2-4
Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
USB Resume from S3
ACPI Suspend Type
Soft-Off by PWRBTN
AC BACK Function
PS2KB Power On Select
PS2 Mouse Power ON
PME Event Wake Up
Modem Ring Resume
Resume by Alarm
x Date (of Month)
x Resume Time (hh:mm:ss)
: Move
Enter: Select
F5: Previous Values
USB Resume from S3
Enabled
Enable USB device resuming from S3. (Default value)
Disabled
Disable this function.
ACPI Suspend Type
S1(POS)
Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR)
Set ACPI suspend type to S3/STR(Suspend To RAM).
Soft-Off by PWRBTN
Instant-Off
Press power button then power off instantly. (Default value)
Delay 4 Sec
Press power button 4 seconds to power off. Enter suspend if button is pressed
less than 4 seconds.
AC BACK Function
Soft-Off
When AC-power back to the system, the system will be in "Off" state.
(Default value)
Full-On
When AC-power back to the system, the system always in "On" state.
Memory
When AC-power back to the system, the system will return to the Last state
before AC-power off.
PS2KB Power On Select
Disabled
Disable this function. (Default value)
Password
Enter from 1 to 8 characters to set the keyboard power on password.
Keyboard 98 If your keyboard have "POWER Key" button, you can press the key to power
on the system.
Any Key
Press any keys on your keyboard to power on the system.
Power Management Setup
[Enabled]
[S1(POS)]
[Instant-Off]
[Soft-Off]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
- 37 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup
Advertisement
Table of Contents
