Table of Contents
Advertisement
Setting
Keystone
This function is used to store or reset the keystone
correction when the AC power cord is unplugged. Use the
Point
buttons to switch between each option.
◄►
Store ........ Keep the keystone correction even when the
AC power cord is unplugged.
Reset ....... Release the keystone correction when the AC
power cord is unplugged.
To correct keystone distortion, press the SELECT button.
The "Keystone" appears on the screen. Use the Point
buttons to correct keystone distortion (p.25).
Blue back
When this function is "On," a blue image is displayed while
the input signal is not detected.
Display
This function decides whether to display On-Screen
Displays.
On ............................ Show all the On-Screen displays.
Countdown Off ......... Show the input image instead of
Off ............................ Hide the On-Screen Displays except;
Use this function when you want
to project images after the lamp
becomes bright enough. The factory
default setting is in this option.
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
● On-Screen Menu
● "Power off?" (p.22)
● "No signal" for Power management
(p.51)
● "Please wait ..."
● Arrows for the True function in the
Screen Menu (p.37)
Keystone
▲▼
Use the Point
◄►
buttons to switch
between the options.
7
Advertisement
Table of Contents
