1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Projector
  5. PLC-XU83
  6. Owner's manual

Sanyo PLC-XU83 Owner's Manual

Sanyo plc-xu83: supplementary guide
Hide thumbs Also See for PLC-XU83:
Table of Contents

Advertisement

Quick Links

Owner's Manual
(Additional Vol. )
Network Set-up
and Operation
Wired and Wireless Setting
Projector Controller

Network Viewer

Moderator Function
First, read the owner's manual of the projector to
understand the projector's basic operation and the safety
instructions.
The safety instructions in the owner's manuals should be
followed.

Advertisement

Table of Contents
loading

Related Manuals for Sanyo PLC-XU83

Summary of Contents for Sanyo PLC-XU83

  • Page 1: Network Viewer

    Operation Wired and Wireless Setting Projector Controller Network Viewer Moderator Function First, read the owner's manual of the projector to understand the projector's basic operation and the safety instructions. The safety instructions in the owner's manuals should be followed.

  • Page 2: Compliance

    Please contact ART for procedure to follow. Do not use this USB Wireless LAN Adapter in the open air. Statement on EC Directive Hereby, SANYO Electric Co., Ltd., declares that this USB Wireless LAN Adapter (XG-705A) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

  • Page 3: Safety Instructions

    CAUTION IN USING NETWORK FUNCTION ● SANYO Electric Co., Ltd. assumes no responsibility for the loss or damage of data, or damage of the computer caused by using this projector. Making back-up copies of valuable data in your computer is recommended.

  • Page 4: Table Of Contents

    Safety Instructions ...3 Table of Contents...4 Operating Environment and Configuration ...6 Required Operating Environment for Computers ...6 Network Specifications of the Projector ...7 1. About LAN Functions ...9 LAN Functions and the Features...10 Image Projecting System via LAN...10 Flow of Image Transfer ...10 An Example of the Connection ...11...
  • Page 5 Advanced Setup ...46 TCP / IP...46 Wireless Setting ...47 E-mail...48 Admin Password ...49 User PIN code ...50 Moderator Login Password ...51 Miscellaneous ...52 Change Configuration Set ...53 Restart...54 7. Project the Image via the Networks ...55 8. Use the Moderator Function ...57 Moderator Function...58 Preparation for Using the Moderator Function...59 Preparation Procedure for Using the Moderator Function ...59...

  • Page 6: Operating Environment And Configuration

    Operating Environment and Configuration Required Operating Environment for Computers When operating the projector via the networks, computers should meet the operating environment below. Memory Free HDD Space Screen Resolution Communication Protocol Wireless LAN Network Correspond Browser Application Microsoft Windows 98SE/Me or...

  • Page 7: Network Specifications Of The Projector

    Network Specifications of the Projector LAN Terminal Data communication speed Protocol USB Wireless LAN Adapter Interface Communication Mode Data Transfer Speed Wireless Frequency (Channel) Modulation Form Protocol Security Service area Operating Voltage Environmental conditions Compliance Countries and Standards Operating Environment and Configuration...

  • Page 9: About Lan Functions

    Chapter 1. About LAN Functions This chapter describes the features, the mechanism, and connection procedures of the LAN.

  • Page 10: Lan Functions And The Features

    LAN (Wired or Wireless). (One computer can operate up to 5 projectors simultaneously.) 3. Digital signal will be reproduced into RGB image signal and will be projected by the projector. ✳ The image will be transferred to each projector. The time lag can occur between each projection.

  • Page 11: An Example Of The Connection

    The illustration below shows an example of the projection via the LAN. You can project the image on Computer (1) (Wired LAN connection), or Computer (2) (Wireless LAN connection) through the selected projector . Computer (1) 1. About LAN Functions...

  • Page 12: Lan Connection Modes

    ■ Wireless LAN, AdHoc 802.11b Communication Mode Communication mode between Wireless LAN equipment. (Communication mode via SSID/ESSID) Computer (2) Access point Network Projector Wireless communication mode :AdHoc Wireless communication mode corresponded computer: AdHoc Wireless communication mode corresponded computer : Infrastructure...
  • Page 13 When the projector's remote control employs mouse operating function, you can operate the computer by the remote control which is provided with the projector. Use the remote control pointing to the projector. You do not need to connect the USB cable to operate the computer mouse.

  • Page 15: Setup Procedures

    Chapter 2. Setup Procedures This chapter describes how to install the NetworkModule software and how to set up the networks.
  • Page 16 2. Setup Procedures To use the projector via the networks, follow the setup procedures below. Install the software on computers. STEP 1 Install the software recorded in CD-ROM on each computer which will be operated. Read following pages of this chapter to install.

  • Page 17: Installing The Software

    Installing the Software Three pieces of software is recorded in the supplied CD-ROM. 1. Insert the CD-ROM into the drive. The software will be activated automatically and "Software License" screen will be displayed. Read the license carefully and if you agree, check "Agree" then click "OK". When the screen is not displayed automatically, open "CD-ROM Drive"...
  • Page 18 2. Setup Procedures ■ When projecting with the Moderator function. For details about Moderator function, refer to the "8. Use the Moderator Function". a Install "NetworkModule Client" into each client's (participants except for the moderator) computers. For installation, refer to"■ When projecting via a selected computer which is connected to the LAN".

  • Page 19: Names And Functions Of The Operation Screen

    Chapter 3. Names and Functions of the Operation Screen This chapter describes the functions of each part of the operation screen.

  • Page 20: Network Connection Standby Display

    Display the communication status of the projector. When the display is blinking, the projector is properly connecting with the network. When the display is not blinking, the projector is not connecting to the network. Display whether the WEP(Encryption) is effective or ineffective.

  • Page 21: Networkmodule Client

    Search the projector connected to the networks. Locator button Click the button after selecting a projector from the Network Projector List, the operated computer's nickname will be displayed on the upper part of the projected screen for a certain period. With this function, you can identify each projector.
  • Page 22 Better Quality------ Screen capturing will be slower but the picture quality will be better. !0 PJ Controller / Multi control button Start up the operation screen of the projector. Refer to "10. How to Use the PJ Controller". (p73-90) !1 Create Nickname box Create a nickname for each participant.

  • Page 23: Networkmodule Moderator

    When the clients have nicknames, the names will be shown. 7 Start Remote Capture button Start capturing the image of the participants and send it to the projector. The image will be sent in real time. 8 Stop Remote Capture button Stop capturing the image of the participants.

  • Page 25: Wired Lan Configurations

    Chapter 4. Wired LAN Configurations This chapter describes the preparation for Wired LAN setting with projectors and how to set the LAN environment.

  • Page 26: Connecting To The Lan Line

    1. Turn on the projector and select "Wired" from the input menu of the projector. The projector's Link Lamp will be on and the Access Lamp will start to blink. If the "Wired setting" is "Off", it will not blink. Follow step 2 and 3 to blink the lamp.
  • Page 27 4. Press the SELECT button. LAN setting screen will appear and selected LAN settings will be displayed. Adjust each item to the setting environment. Consult your system administrator about the detailed settings. Adjust the figures with the Point ed buttons and move among the items with the Point 7 8 buttons.

  • Page 28: Confirming The Operation

    In that case, disable the Firewall function and try searching again. ✳ If the projector is named, the name will be displayed. The name can be set with following the procedures in "6. Configurations with Browser" ➔ "Quick Setup" (p44-45) or "Advanced Setup"...
  • Page 29 When set up the projector where separated by the router and the segment is different; Projector will not be found nor displayed. In this case, the projector needs to be searched directly by the IP address. 1. Click the Add NetworkModule button in the Advanced Settings menu. The Add NetworkModule screen will appear.

  • Page 30: User Pin Code / Wired Information / Wired Factory Default

    "Cancel". When you do not want to set the User PIN code, set "0000". It is recommended to set the User PIN code if you use the projector via the networks. You can also change the User PIN code. See "6. Configurations with Browser" ➔ "Advanced Setup" ➔...

  • Page 31: Factory Default Setting Of The Wired Lan

    Factory Default Setting of the Wired LAN Parameter IP ADDRESS 169.254.100.100 255.255.0.0 SUBNET MASK GATEWAY 255.255.255.255 ADDRESS 255.255.255.255 DNS ADDRESS MANUAL IP CONFIGURATION INTERRUPT ENABLE CONNECTION PERMISSION IP CONFIGURATION ENABLE with ARP+PING DNS DOMAIN SYSTEM BLANK PASSWORD 0000(NONE) USER PIN CODE These settings can be made only by the browser.

  • Page 33: Wireless Lan Configurations

    If connecting in Infrastructure mode with an access point, the access point is required to support IEEE 802.11b/g. Caution : Do not use a mobile phones or PHS near (within 20cm / 8inch) the projector. It may cause malfunction. Chapter...

  • Page 34: Attaching The Usb Wireless Lan Adapter

    With Easy setting, you can make Wireless LAN settings easily without any complicating settings. (p36) 1. Turn on the projector and select "Wireless" from the input menu of the projector. The Network connection standby display will appear and "Please wait..." message will be displayed.
  • Page 35 SSID / ESSID / BSSID for the network type "Infrastructure" and "AdHoc" are required to be entered the same characters into the projector, the access point, and the Wireless LAN compatible computer. (up to 32 characters) Characters can be selected from A~Z, a~z, blank (space), 0-9, or - (hyphen) with the Point ed buttons.

  • Page 36: Easy Setting

    Wireless LAN environment to the "SIMPLE" setting LAN environment.) After completing the settings, the projector will start searching the projector which was set as "SIMPLE" and will display the name of the projector or the MAC address on the projector list.

  • Page 37: User Pin Code / Wireless Information / Wireless Factory Default

    The User PIN code is to restrict the access from the networks to the projector. After setting the User PIN code, you need to enter it to operate the projector via the networks. Select "User PIN code" from the projector menu. Set with the same procedures as setting Wired LAN User PIN code.

  • Page 38: Wireless Lan Factory Default Settings

    5. Wireless LAN Configurations Wireless LAN Factory Default Settings Factory default settings for LAN4, LAN5, and SIMPLE as follows. Setting Items IP ADDRESS SUBNETMASK GATEWAY ADDRESS IP CONFIGURATION INTERRUPT CONNECTION PERMISSION IP Address Setting with ARP+PING WIRELESS CHANNEL NETWORK TYPE WIRELESS SSID/ESSID (SSID/IBSSID)

  • Page 39: Configurations With Browser

    6. Configurations with Browser The projector can be set, controlled and operated via the browser. Caution: When operating the projector with the browser, connect the projector to the computer with Wired or Wireless LAN. Complete the connection in advance. The browser can set or operate : •...

  • Page 40: Introduction

    "LAN Settings" button in the "Local Area Network (LAN) Settings" field. Click the "Advanced" button in the "Proxy Server" field. Enter the IP address set on the projector in the "Do not use proxy server for addresses beginning with" field.

  • Page 41: Starting Up The Browser

    1. Turn on the projector. 2. Activate NetworkModule Client (or NetworkModule Moderator). 3. Select the projector to set from the Network Projector List. (Selected projector will be blue.) 4. Click the Advanced settings button to display the Advanced settings. Click the Configure NetworkModule button to display the NetworkModule Configuration screen.

  • Page 42: Information

    6. Configurations with Browser Information Display the current setting environment. The contents differ depending on Wired or Wireless LAN environment. Screen of Wireless LAN Screen of Wired LAN...
  • Page 43 Boot ROM Version ...Show the boot ROM version of the projector. Hardware Address ...Show the MAC address. IP Address ...Show the IP address currently set on the projector. If DHCP is set, the Wireless Mode* ...Show the Communication standard 802.11b or 802.11b.g Wireless Link Status*...Show the Wireless communication mode and its status of the projector.

  • Page 44: Quick Setup

    If you have set the items from the advanced setup, Quick Setup is not necessary. Setting items differ depending on the Wireless LAN and Wired LAN. To reflect the settings on the projector, click "APPLY". For details about each item/button, see next page.
  • Page 45 Network Type*...Select either “Infrastructure” or “AdHoc”. SSID* ...Set the SSID/ESSID. (up to ASCII 32 characters) APPLY button ...Click the APPLY button to update. The screen to restart the projector will be REFRESH button ...Update and show the adjusted data. RESTORE Factory Default Settings button ...Restore the settings to the values at the factory.

  • Page 46: Advanced Setup

    Domain ...Enter the domain name where the projector belongs to. (up to ASCII 254 DNS Server...Enter the address of the DNS server. APPLY button ...Click the APPLY button to update. The screen to restart the projector will be REFRESH button ...Update and show the adjusted data.

  • Page 47: Wireless Setting

    LEAP Username / Password ...When selecting 802.1 x "LEAP" in WEP security, enter the user name APPLY button ...Click the APPLY button to update. The screen to restart the projector will be REFRESH button ...Update and show the adjusted data.

  • Page 48: E-Mail

    Time ...Set the time of "Accumulated Lamp-use time reaches in ***hours". Attached Message ...Attach the message to the e-mail of "Accumulated Lamp-use time APPLY button ...Click the APPLY button to update. The screen to restart the projector will be REFRESH button ...Update and show the adjusted data.

  • Page 49: Admin Password

    Re-enter New Admin Password...Re-enter the new admin password you wish to set. The password you APPLY button ...Click the APPLY button to update. The screen to restart the projector will be If you set the admin password for the first time, do not enter any password in the "Enter Current Admin Password"...

  • Page 50: User Pin Code

    6. Configurations with Browser User PIN code With this screen, you can set the User PIN code to transfer the image to the projector and to activate PJ Controller. You can set different PIN code as you set for Admin Password. (p49) When you reset the User PIN code, you do not need to enter the current PIN code.

  • Page 51: Moderator Login Password

    Moderator Login Password To use the Moderator function, you need to set the Moderator Login password here. For operating the Moderator function, a Moderator Login password is required on this screen. When resetting the Moderator Login password, you do not need to enter the current Moderator Login password.

  • Page 52: Miscellaneous

    6. Configurations with Browser Miscellaneous You can set the name to the projector. The set name will be displayed on the Network Projector List of the application operating screen. Parameter Projector...Name a projector to distinguish it from other projectors. (up to 32 Status Bar ...Select "Expand view"...

  • Page 53: Change Configuration Set

    Parameter LAN1-5,.SIMPLE* ...Select a LAN setting from LAN1-3, LAN4, LAN5 and SIMPLE. APPLY button ...Click the APPLY button to update. The screen to restart the projector will be REFRESH button ...Cancel the new settings. * LAN4, LAN 5 and SIMPLE will be displayed when USB Wireless LAN Adapter is inserted.

  • Page 54: Restart

    6. Configurations with Browser Restart You can restart the projector on this screen. To enable the new settings, the projector has to be restarted. Click "RESTART". Parameter RESTART button ...Click this button when you restart the projector after completing the CANCEL button ...Cancel to restart the projector.

  • Page 55: Project The Image Via The Networks

    Chapter 7. Project the Image via the Networks Project the image on the computer screen by operating the projector which is connected to the networks.
  • Page 56 Capture buttons. If multiple projectors have different PIN codes, you need to enter PIN codes for every projector. To set the User PIN code, refer to "4.Wired LAN setting" ➔ "Set the User PIN code" (p30), "6. Configurations with Browser" ➔ "Advanced Setup" ➔ "User PIN code" (p50).

  • Page 57: Use The Moderator Function

    Chapter 8. Use the Moderator Function With Moderator function, the moderator can project the participants' computer screen through the projector in meetings or in classes.

  • Page 58: Moderator Function

    This function enables you to project the participants' data directly in a short time and in real time without taking time to transfer the data to the computer connected to the projector. The image data will not be limited by the computer's application because the data transfer of each computer adopts the screen capturing system.

  • Page 59: Preparation For Using The Moderator Function

    1. Configure the Moderator Login password in the projector to put the projector under moderator's control. (p51) 2, Resister a moderator in the projector with the moderator screen. Set the Session password at this step. After the registration, only the moderator can control the projector and clients cannot operate.

  • Page 60: Setting The Moderator Function

    "OK". 5. Moderator login password confirmation screen will appear. Enter the password set in step 2 and click "OK". The projector has been put under the moderator's control. The projector will be pink in the Network Projector List. Repeat step 3, 4, 5 and put each projector under the moderator's control. After completing the setting, the registered projector can only connect to the computers which belong the session group.

  • Page 61: Registration Of The Clients (Participants)

    7. Set session password screen will appear. Enter the password registered by a moderator (Being registered at step 4) 8. Click "OK". The client screen will disappear and the projector icon will be displayed in the task tray of the computer. After the step, the client's (participant's) computer name will be put under the moderator's control.

  • Page 62: Unregister From Moderator Status

    When projecting through multiple projectors, select the projectors with the computer mouse by holding the [Ctrl] key. 3. Click the Capture button. Selected client's image will be projected from the projector in real time. Stop Projecting the Client's Images Select the client to stop being projected the image from the client list, and click the Stop Remote Capture button.

  • Page 63: How To Use Network Viewer

    Project images on a FTP server, which is on the same LAN with the projector, through the projector by operating a projector or a computer. First, check if the projector and the computer are connected to the networks correctly with Wired or Wireless, to project the image properly.

  • Page 64: The Mechanism Of Network Viewer And The Flow Of The Signal

    Network Viewer is to project an image stored on a FTP server which is on the same LAN as a computer, through the projector by operating a computer or a projector. The flow of the signal for each communication mode is shown below.

  • Page 65: Operation

    1. Information about the FTP server, which provides images, is sent from the computer to the projector and the information will be held. 2. The computer issues an instruction to project the image, then the projector will follow the instruction and read the image data each time to project.

  • Page 66: Projecting The Image

    Projecting the Image Operation can be made with any of 1) PJ Controller, 2) Browser, or 3) Projector. When operating with the projector, first, set the FTP server which provides images with 1) PJ Controller or 2) Browser. Operate as follows.
  • Page 67 6. Click Set button Click Set button to set up the server information on the specified projector. The configured server information can be stored even if you unplug the projector . 7. Select Play Mode and display the image Play Mode ...Auto (Infinite Loop) (Keeps playing images repeatedly)
  • Page 68 1. Select "Wireless" for Wireless LAN and "Wired" for Wired LAN from the input menu of the projector. Activate " NetworkModule Client" or "NetworkModule Moderator". Operating directly from the browser is also possible. In this case, enter the projector IP address directly into browser's address bar. Configure...
  • Page 69 5. Click APPLY button Click APPLY button to set up the server information on the specified projector. The configured server information can be stored even if you unplug the projector . 6. Select Play Mode and display the image Play Mode ...Auto (Infinite Loop) (Keeps playing images repeatedly)
  • Page 70 9. How to Use Network Viewer 3) Operating with the projector Before operating the Network Viewer from the projector, the FTP server needs to be configured by PJ Controller or browser in advance. Regarding the configuration of the FTP server, refer to "1) Operating with the PJ Controller"...
  • Page 71 4. Select, execute, and stop the mode of image replay. Move the red arrow pointer to the item you wish to choose. Using Point buttons and SELECT button of the projector, configure or execute each item. Auto ...Play images and stop playing according to following configurations.

  • Page 73: How To Use The Pj Controller

    PJ Controller works for; • Operating the projector • Operating the Network viewer • Controlling the projector Monitor the operation status of the projector in real time. Send an e-mail to the administrator about operation status of the projector. • Operating multiple projectors simultaneously.

  • Page 74: How To Operate

    10. How to Use the PJ Controller How to Operate This operation requires that the projector is set correctly on the network and the image in the computer is properly displayed from the projector with "NetworkModule Client" or "NetworkModule Moderator" applications on the computer.

  • Page 75: Initial Settings

    Temperature ...Set the unit of temperature displayed on the control screen of the Comment ...You can store any comments regarding the initial settings. To save the Description projector. Select "Centigrade" or "Fahrenheit" from the pull-down menu and click "Set". comments you entered, click "Save".

  • Page 76: E-Mail Setting

    10. How to Use the PJ Controller E-mail Setting The projector has a function to send an e-mail to inform its operating condition to the administrator or users. Select E-mail Setting from the main menu and configure each item as follows: 1.
  • Page 77 Please refer to the item “Check the status of projector” for the location of the sensors "A", "B" and "C", and temperature (p.79). Also see the owner's manual of the projector for further details.

  • Page 78: Power & Status

    If you set this function as Normal, the network part of the projector is constantly provided with power even if the projector is turned off. If you set this as Eco, then the network part will be turned off when you turn off the projector. Consequently, you cannot turn on / off...
  • Page 79 "Temperature Error / Standby". "Normal", "Temperature Error", "Power Failure" The icons A, B and C stand for the thermal sensors inside the projector. If the internal temperature exceeds the certain point, each icon changes as below and let users know the error. Check the air filters and surrounding area of exhaust and intake vents of the projector.

  • Page 80: Control

    Note:Control items displayed on this screen are varied depending on the input source or product model of the projector. So the figures shown in this section may be different from the actual screen displayed on your computer. For further details, refer to the owner's manual of your projector. This function is not available if the projector is turned off.
  • Page 81 PC adjustment This feature optimizes the signal from the connected computer to display the screen. ✳ PC adjustment screen is displayed only when Computer1 (Analog) or Computer 2 (RGB) is selected for the input source. Parameter Description Current Mode ...Display computer mode Auto PC adjustment...Executed by clicking Start button.

  • Page 82: System Adjustment

    On this screen, you can select the color system and scan mode for the video signal. This screen is displayed only when Video (Video/Component) is selected for the input source of the projector. Depending on the signal, the screen is varied as follows. Component Input VIDEO/S-VIDEO Input NOTE: Items in System Adjustment are displayed only for video input (video/Component).

  • Page 83: Image Adjustment

    Set button. if you click Reset button, all the adjusted values will be reset. ✳ Some items may not be adjusted depending on the functions of your projector or input signal. In this case, " ----" will be shown in the field of the item. Parameter Description Image Adjustment Mode...Select from "Dynamic", "Standard", "Real*", "Cinema**", "Black Board", "Image 1 –...
  • Page 84 If “1080i”, 1035i”, or “720p” scan mode is selected from "System Adjustment" (Y, Pb/Cb, Pr/Cr input only) setting in "SYSTEM" screen, you cannot configure "Screen" settings. Sound On this screen, you can adjust the sound volume of the projector. Parameter Description Aspect ...Select "Norma"l, "Real*", "Wide", or "Full...
  • Page 85 10. How to Use the PJ Controller Setting On this screen, you can configure the projector. Refer to the next page for each item and description. The items displayed on this screen are varied according to the functions provided to the projector.
  • Page 86 Power Management ...Select "Ready", "Shut Down" or "OFF" from the pull-down menu. Enter the count- On Start ...By clicking "ON", the projector will be automatically turned on when the power Lamp Control ...Select the Lamp Mode from "Normal", "Eco" and "Auto".

  • Page 87: Save Actual Adjustment

    Service Items on this screen are used for maintenance of the projector. Save Actual Adjustment On this screen, you can save and load the setting. The items you can save are as follows: Input, PC adjustment, System Adjustment, Image Adjustment, Screen and Setting.
  • Page 88 10. How to Use the PJ Controller 2. Select Set Number and name the setting Select the Set Number you wish to store the adjustment from the pull-down menu. Enter the name of the setting in the Memo field. 3. Save the setting (Set) Click Save button to save the adjustment.

  • Page 89: Multi Control

    3. Click the PJ Controller / Multi Control button to display the Multi Control screen. ✳ When selecting only one projector in step 2, the PJ Controller screen will appear in step 3. PJ Controller /...
  • Page 90 No Show ...Select "ON" to display the blank screen. Freeze ...On or off the Freeze function. On Start ...Select to turn on or off the projector with the projector power source. Lamp Control ...Select the brightness of the screen. Key Lock ...Lock or Unlock the key operation of the projector and the remote control.

  • Page 91: Appendix

    Chapter 11. Appendix - Troubleshooting - Terminology - Setting up IP Address with arp + ping Command...

  • Page 92: Troubleshooting

    11. Appendix Troubleshooting If you have any trouble in setup or operation of the projector, refer to the troubleshooting items and check the relevant matters described. ■ The computer cannot connect projectors. Wired LAN Is the LAN cable connected to the projector properly? Are the Link lamp and Access lamp of the LAN terminal lighting properly? Not lighting : The LAN setting of the projector is set "On"?
  • Page 93 When selecting LAN1 (factory default setting) Check IP address, Sub net and Gateway of the projector and computer. For further details of the configuration, contact your system administrator. Is the segment where the projector is installed different from the projector? Specify IP Address directly on the optional setting.
  • Page 94 ■ The projector / PJ Controller cannot be turned on/off. Make sure the settings of the projector are correct to use the projector with it. Refer to "10. How to Use the PJ Controller" ➔ " Power and Status" (p78, 79).

  • Page 95: Terminology

    Terminology DHCP server (Dynamic Host Configuration Protocol) It is necessary to set an IP address for each computer or equivalent equipment when establishing a network by TCP/IP. If there exists DHCP server on the network, it will assign IP addresses to client computers every time they request it.

  • Page 96: Setting Up The Ip Address With "Arp" + "Ping"Command

    (if this message appears, the IP address was successfully assigned to projector) Note: The assigned IP address is saved in the firmware of projector, thus it will remain set even when the power is off. You can use the same method to re-assign an IP address.
  • Page 97 SANYO Electric Co., Ltd...

This manual is also suitable for:

Plc-xu86

Table of Contents