Barometer; View Barometer Area; Select Measurement Unit; View Barometer History - Oregon Scientific BAR998HGN Manual

Table of Contents

Advertisement

BAROMETER

This product tracks fluctuations in barometric pressure to
provide the weather forecast ( 13), and the current and
past 24 hours barometric pressure history. Measurements
are recorded by the main (indoor) unit.
VIEW BAROMER AREA
Press SELECT to navigate to the Barometer Area.
If
is NOT shown, press MODE.

SELECT MEASUREMENT UNIT

Press mb / inHg on the back of the weather station.
Barometric data is
shown in two areas.
The top area shows
a 24-hour bar chart.
The bottom area
shows current and
historical readings.
12

VIEW BAROMETER HISTORY

Navigate to the Barometer Area, then press HISTORY
repeatedly to scroll through the measurements. The
number shown in the HR box indicates how long ago each
measurement was taken (e.g., 2 hours ago, 3 hours ago,
etc.).

BAR CHART DISPLAY

The bar chart visually shows
atmospheric changes from
the current hour [0] to
24 hours prior (-24).

SET ALTITUDE

Set the altitude to match how far above or below sea level
you are living. This ensures that the barometric pressure
readings are accurate.
1.
Navigate to the Barometer Area.
2.
Press and hold HISTORY for 2 seconds.
3.
Press UP or DOWN to set the altitude in 10 meter
increments (-100m to 2500m).
4.
Press HISTORY to confirm.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bar993hgn

Table of Contents