Table of Contents
Advertisement
IDE2 Conductor Cable
8Auto
8ATA66/100/133
8ATA33
On-Chip Primary PCI IDE
8Enabled
8Disabled
On-Chip Secondary PCI IDE
8Enabled
8Disabled
AC97 Audio
8Enabled
8Disabled
USB Controller
8Enabled
8Disabled
USB Legacy Support
When USB keyboard or mouse is installed, please set at Enabled.
8Enabled
8Disabled
Onboard RAID device **
M If you don't set any HDD Dev ice in IDE3 or 4 but enable the function, the normal message
"MBUltra133 BIOS is not installed becasue there are no driv es attached" will come out.
Ignore this message or set the option disable to make the message disappear.
Enable onboard RAID function.(Default v alue)
8Enabled
Disable this function.
8Disabled
"**" For GA-8SQ800 Ultra only.
GA-8SQ800 Ultra/GA-8SQ800 Motherboard
Will be automatically detected by BIOS. (Default Value)
Set IDE2 Conductor Cable to ATA66/100/133 (Please make sure y our IDE
dev ice and cable is compatible w ith ATA66/100/133).
Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE dev ice and
cable is compatible w ith ATA33).
Enable onboard 1st channel IDE port. (Default v alue)
Disable onboard 1st channel IDE port.
Enable onboard 2nd channel IDE port. (Default v alue)
Disable onboard 2nd channel IDE port.
Enable onboard AC'97 audio function. (Default v alue)
Disable this function.
Enable USB Controller. (Default v alue)
Disable USB Controller.
Enabled USB key board or mouse support.
Disabled USB key board or mouse support. (Default v alue)
- 36 -
Advertisement
Table of Contents
