Gigabyte GA-8SQ800 Ultra User Manual page 26

14) BAT (Battery)
+
15) F_AUDIO (Front Audio Connector)
1
M IC
REF
Front Audio (R)
Reserved
Front Audio (L)
9
16) SUR_CEN
1
SUR OUTL
GND
CENTER_OUT
17) CD_IN (CD Audio Line In)
CD-L
GND
CD-R
GA-8SQ800 Ultra/GA-8SQ800 Motherboard
2
GND
POWER
Rear Audio (R)
Rear Audio (L)
10
SUR OUTR
BASS_OUT
1
- 22 -
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer's instructions.
If you want to erase CMOS...
1.Turn OFF the computer and unplug the power
cord.
2.Remove the battery, wait for 30 second.
3.Re-install the battery.
4.Plug the power cord and turn ON the
computer.
If you want to use "Front Audio" connector,
you must remove 5-6, 9-10 Jumper. In order to
utilize the front audio header, your chassis must
have front audio connector. Also please make
sure the pin assigment on the cable is the same
as the pin assigment on the MB header. To find
out if the chassis you are buying support front
audio connector, please contact your dealer.
Please note, you can have the of using front
audio connector or of using rear audio connector
to play sound.
Please contact your nearest dealer for optional
SUR_CEN cable.
Connect CD-ROM or DVD-ROM audio out
to the connector.