Advertisement
1. Remove round battery cover to access clock movement and
battery compartment(s).
2. Insert 1 AA battery into the movement at the center of the clock.
3. OPTIONAL: For extended battery life, install two additional
batteries, one on either side of the movement.
4. Select your specific time zone by firmly pressing the correct time
zone button once. Replace battery cover.
5. The default time zone is Pacific Time. If the clocks sets and the
hours are off, hold the correct time zone button for 5 seconds to
correct.
•
Indoor: Choose a location 6 feet or more from electronics such as
cordless phones, wireless gaming systems, televisions, microwaves,
routers, baby monitors, etc., which can prevent signal reception.
•
Position near an exterior wall that faces Ft. Collins, Colorado for
WWVB time signal reception.
•
The antenna is available for signal reception when the front or back
of the clock faces Colorado.
•
Outdoor: Choose a location with an overhang to protect the clock
from the overhead sun or standing snow or rain. A shaded location
will prevent inaccurate temperature readings.
•
Mount the clock on a wall with the hanging hole on the back of the
clock. Be sure the battery cover is on snug.
Get Started
Round
Battery
Cover
Position Clock
2 |
P a g e
Advertisement
