Welcome; Get Started - La Crosse Technology BBB87733 Instructional Manual

Welcome!

Thank you for purchasing the Atomic Digital Wall Clock, designed for
years of trouble free performance. Please read this important note
about setup. Thank you!
IMPORTANT:
After installing batteries, the clock will look for the Atomic time signal
for 7 minutes. The buttons will not function during the signal search.
Options:
• Hold the WWVB SEARCH button for 3 seconds to stop the Atomic
signal search.
• Manually set the time, date, and time zone.
• The clock will search for the Atomic time signal again after
midnight.
• Press WWVB SEARCH button anytime, to start an Atomic signal
search.
For information about Atomic Time, visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm

Get Started

1. Insert 2 new AAA, Alkaline batteries into the clock. Observe the
correct polarity.
AAA
AAA
2. Wait for the clock to set itself to Pacific time zone (default) then
press the ZONE button to select your time zone.
3. Stop the initial Atomic Time Search and set the time manually.
Page 1 www.lacrossetechnology.com/support
OR
BBB87333