La Crosse Technology WT-3181PL-Q Instruction Manual

18” indoor/outdoor wall clock

Download this manual

Model: WT-3181PL-Q

Instruction Manual

DC: 123114

18" Indoor/Outdoor Wall Clock

Time

Hygrometer

Thermometer

Time Set

Wheel

Battery

compartment

Battery Cover

1-AA Alkaline

Battery

Get Started

Step 1: Remove round battery cover from the back of the clock.

Step 2: Insert 1 fresh AA, LR6 1.5 volt ALKALINE battery according to

the polarity marked on the case. The battery is a snug fit.

Step 3: Rotate the time set wheel to set the time.

Step 4: Place the round battery cover back on the clock.

Note: We recommend that you change the battery every 12 months to

maintain accuracy. Remove the battery when the clock will not be in use

for an extended period.

Model: WT-3181PL-Q www.lacrossetechnology.com/support

Page | 1

Page 1: Instruction Manual
Step 4: Place the round battery cover back on the clock. Note: We recommend that you change the battery every 12 months to maintain accuracy. Remove the battery when the clock will not be in use for an extended period. Model: WT-3181PL-Q www.lacrossetechnology.com/support Page | 1...
Page 2 Be sure the battery cover is on snug. Temperature and Humidity The La Crosse Technology® wall clock has two analog sensors that measure surrounding temperature and humidity. The temperature information is displayed in degrees Fahrenheit and Celsius, and humidity data is displayed in percentage.
Page 3 Always purchase the correct size and grade of battery most suitable for intended use.  Replace all batteries of a set at the same time.  Clean the battery contacts and also those of the device prior to battery installation. Model: WT-3181PL-Q www.lacrossetechnology.com/support Page | 3...
Page 4  Improper use or unauthorized opening of housing voids warranty. Warranty and Support Information La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support...