Table of Contents
Advertisement
SDRAM RAS# to CAS# delay
3
Set SDRAM RAS# to CAS# delay 3 SCLKs. (Default value)
2
Set SDRAM RAS# to CAS# delay 2 SCLKs.
SDRAM RAS# Precharge
3
Set SDRAM RAS# Precharge Time to 3. (Default value)
2
Set SDRAM RAS# Precharge Time to 2.
Refresh Mode Select
7.8 usec
Set active to Refresh mode timing is 7.8 usec.
15.6 usec
Set active to Refresh mode timing is 15.6 usec.(Default value)
64 usec
Set active to Refresh mode timing is 64 usec.
DRAM Data Integrity Mode
ECC
Set DRAM Data Integrity Mode by ECC.
Non-ECC
Set DRAM Data Integrity Mode by Non-ECC. (Default value)
DRAM Read Thermal Mgmt
Disabled
Disable DRAM Read Thermal Mgme . (Default value)
Enabled
Enable DRAM Read Thermal Mgme.
Delay Transaction
Disabled
Normal operation.
Enabled
For slow speed ISA device in system. (Default value)
3 1
BIOS Setup
Advertisement
Table of Contents
