❸ Turning On The Projector - Dukane ImagePro 6650HDSS User Manual

Hide thumbs Also See for ImagePro 6650HDSS:
Table of Contents

Advertisement

❸ Turning on the Projector
WARNING
The projector produces a strong light. When turning on the power, make sure no one within projection range is
looking at the lens.
1. Remove the lens cap.
With the lens cap's stopper pressed up, pull forward and
off.
2. Press the
(POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator lights blue and the image is projected
on the screen.
TIP:
• When the message "PROJECTOR IS LOCKED! ENTER YOUR
PASSWORD." is displayed, it means that the [SECURITY]
feature is turned on. (→ page 38)
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE: When no input signal is present, the no-signal guidance is
displayed (factory menu setting).
2. Projecting an Image (Basic Operation)
Standby
Steady red light
(→ page 115)
12
Stopper
Blinking
Blinking blue
light
Power On
Steady blue
light

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagepro 6650wss

Table of Contents