❸ Turning On The Projector; Performing Lens Calibration - Dukane 6780WU User Manual

❸ Turning on the Projector
1. Remove the lens cap.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator
After that, the image will be projected onto the screen.
TIP:
• When the message "PROJECTOR IS LOCKED! ENTER YOUR
PASSWORD." is displayed, it means that the [SECURITY]
feature is turned on. (→ page 43)
• When the ECO message is displayed, it means that [ON] is
selected for [ECO MESSAGE]. (→ page 112)
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE: A blue screen (blue background) is displayed when no signal
is being input (by factory default menu settings).

Performing Lens Calibration

After mounting the separately available lens unit or replacing
a lens unit, perform [LENS CALIBRATION] by holding to press
ZOOM/L-CALIB. button on the cabinet over two seconds.
Calibration corrects the adjustable zoom, shift, and focus
range. If calibration is not performed, you may not be able to
get the best focus and zoom even if you adjust the focus and
zoom for the lens.
lit in green will start to blink in blue.
2. Projecting an Image (Basic Operation)
Sleep state
Blinking in green
(→ page 180)
17
Blinking Power On
Blinking blue Steady blue
light light