Table of Contents
Advertisement
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto
Set Robust Graphics Booster to Auto. (Default value)
Fast
Set Robust Graphics Booster to Fast.
Turbo
Set Robust Graphics Booster to Turbo.
C.I.A.2
C.I.A.2 (CPU Intelligent Acelerator 2) is designed to detect CPU loading during software program
executing, and automatically adjust CPU computing power to maximize system performance.
Disabled
Disable this function. (Default value)
Cruise
Set C.I.A.2 to Cruise. (Automatically increase CPU frequency(5%,7%) by
CPU loading.
Sports
Set C.I.A.2 to Sports. (Automatically increase CPU frequency(7%,9%) by
CPU loading.
Racing
Set C.I.A.2 to Racing. (Automatically increase CPU frequency(9%,11%) by
CPU loading.
Turbo
Set C.I.A.2 to Turbo. (Automatically increase CPU frequency(15%,17%) by
CPU loading.
Full Thrust
Set C.I.A.2 to Full Thrust. (Automatically increase CPU frequency(17%, 19%)
by CPU loading.
Warning: Stability is highly dependent on system components.
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled
Disable CPU Host Clock Control. (Default value)
Enabled
Enable CPU Host Clock Control.
CPU Host Frequency (Mhz)
100MHz ~ 600MHz
If you use FSB533 Pentium 4 processor, please set "CPU Host Frequency" to 133MHz.If you use
FSB800 Pentium 4 processor, please set "CPU Host Frequency" to 200MHz.
Incorrect using it may cause your system broken. For power End-User use only!
PCI Experss Frequency (Mhz)
Auto
Set PCI Express frequency automatically. (Default value)
90~150
Set PCI Express frequency from 90MHz to 150MHz.
Memory Frequency For
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency=533MHz,
2.5
Memory Frequency = Host clock X 2.5
3
Memory Frequency = Host clock X 3.
4
Memory Frequency = Host clock X 4.
Auto
Set Memory frequency by DRAM SPD data. (Default value)
GA-8I915PL-G Motherboard
Set CPU Host Frequency from 100MHz to 600MHz.
- 44 -
Hide quick links:
Advertisement
Table of Contents
