Gigabyte GA-8I915PL-G User Manual page 37

On-Chip SATA Mode
Disabled
Auto
Combined
Enhanced
Non-Combined
PATA IDE Set to
Ch.1 Master/Slave
Ch.0 Master/Slave
SATA Port 0/2 Set to
This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".
If PATA IDE were set to Ch. 1 Master/Slave,this function will auto set to Ch. 0 Master/Slave.
SATA Port 1/3 Set to
This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".
If PATA IDE were set to Ch. 0 Master/Slave,this function will auto set to Ch. 1 Master/Slave.
USB Controller
Enabled
Disabled
USB 2.0 Controller
Disable this function if you are not using onboard USB 2.0 feature.
Enabled
Disabled
USB Keyboard Support
Enabled
Disabled
USB Mouse Support
Enabled
Disabled
AC97 Audio
Auto
Disabled
Onboard H/W RAID
Enabled
Disabled
Onboard H/W LAN
Enabled
Disabled
Disable this function.
BIOS will auto detect. (Default value)
Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on
the motherboard; 2 for SATA and the other for PATA IDE.
Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6
HDDs to use.
Set On-Chip SATA mode to Non-Combined, SATA will be simulated to
PATA mode.
Set PATA IDE to Ch. 1 Master/Slave.
Set PATA IDE to Ch. 0 Master/Slave. (Default value)
Enable USB Controller. (Default value)
Disable USB Controller.
Enable USB 2.0 Controller. (Default value)
Disable USB 2.0 Controller.
Enable USB Keyboard Support.
Disable USB Keyboard Support. (Default value)
Enable USB Mouse Support.
Disable USB Mouse Support. (Default value)
Auto detect AC97 audio function. (Default value)
Disable this function.
Enable Onboard H/W RAID function. (Default value)
Disable this function.
Enable Onboard H/W LAN function. (Default value)
Disable this function.
- 37 - BIOS Setup