Table of Contents
Advertisement
POWER ON Function
Disabled
Any KEY
Mouse
Mouse/Any KEY
Onboard Serial P ort 1
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
Onboard Serial P ort 2
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
UART Mode Select
This item allow s y ou to determine w hich I n fra Red(IR) function of Onboard I/O chip.
Normal
IrDA
ASKIR
UR2 Dupl ex Mode
This feature allow s you to seclect IR mode.
This function w ill av ai l able w hen "UART Mode Select" doesn't set at Normal.
Half
Full
Onboard Parallel port
Disabled
378/IRQ7
278/IRQ5
3BC/IRQ7
Paral lel Port Mode
SPP
EPP1. 9+SPP
ECP
EPP1.9+ECP
PRI N TER
EPP1. 7+SPP
EPP1.7+ECP
ECP Mode Use DMA
3
1
GA-8I865GVM(F)-775 Motherboard
Disable this function. (Default v alue)
Press any key to pow er on the sy stem.
Double click on mouse left button to pow er on the sy stem.
Press any key or double cli c k on mouse left but t on to pow er on the sy stem.
BIOS w ill automatically setup the port 1 address.
Enable onboard Serial port 1 and address is 3F8. (Default v alue)
Enable onboard Serial port 1 and address is 2F8.
Enable onboard Serial port 1 and address is 3E8.
Enable onboard Serial port 1 and address is 2E8.
Disable onboard Serial port 1.
BIOS w ill automatically setup the port 1 address.
Enable onboard Serial port 2 and address is 3F8.
Enable onboard Serial port 2 and address is 2F8. (Default v alue)
Enable onboard Serial port 2 and address is 3E8.
Enable onboard Serial port 2 and address is 2E8.
Disable onboard Serial port 2.
Set onboard I/O chip UART to normal mode. (Default v alue)
Set onboard I/O chi p UART to IrDA mode.
Set onboard I/O chip UART to ASKIR mode.
IR Function Duplex Half. (Default v alue)
IR Function Duplex Full.
Disable onboard LPT port.
Enable onboard LPT port and address is 378/IRQ7. (Default v alue)
Enable onboard LPT port and address is 278/IRQ5.
Enable onboard LPT port and address is 3BC/IRQ7.
Using Parallel port as Standard Parallel Port.
Using Parallel port as Enhanced Parallel Port 1.9 and SPP mode.
Using Parallel port as Extended Capabilities Port.
Using Parallel port as Enhanced Parallel Port 1.9 and ECP mode.
Using Parallel port as printer port. (Default v alue)
Using Parallel port as Enhanced Parallel Port 1.7 and SPP mode.
Using Parallel port as Enhanced Parallel Port 1.7 and ECP mode.
Set ECP Mode Use DMA to 3. (Default v alue)
Set ECP Mode Use DMA to 1.
- 36 -
Advertisement
Table of Contents
