2-2 Connecting to the Wireless Access point by web browser
After the network connection is built, the next step you should do is
setup the access point with proper network parameters, so it can work
properly in your network environment.
Before you can connect to the access point and start configuration
procedures, your computer must be able to get an IP address
automatically (use dynamic IP address). If it's set to use static IP address,
or you're unsure, please follow the following instructions to configure
your computer to use dynamic IP address:
If the operating system of your computer is....
Windows 95/98/Me
Windows 2000
Windows XP
Windows Vista
- please go to section 2-2-1
- please go to section 2-2-2
- please go to section 2-2-3
please go to section 2-2-4
8