Table of Contents
Advertisement
! ! ! ! ! Onboard Serial Port 1
!Auto
BIOS will automatically setup the port 1 address.
!3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8. (Default value)
!2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8.
!3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8.
!2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8.
!Disabled
Disable onboard Serial port 1.
! ! ! ! ! Onboard Serial Port 2
!Auto
BIOS will automatically setup the port 2 address.
!3F8/IRQ4
Enable onboard Serial port 2 and address is 3F8.
!2F8/IRQ3
Enable onboard Serial port 2 and address is 2F8. (Default value)
!3E8/IRQ4
Enable onboard Serial port 2 and address is 3E8.
!2E8/IRQ3
Enable onboard Serial port 2 and address is 2E8.
!Disabled
Disable onboard Serial port 2.
! ! ! ! ! Onboard Parallel port
!378/IRQ7
Enable onboard LPT port and address is 378/IRQ7. (Default Value)
!278/IRQ5
Enable onboard LPT port and address is 278/IRQ5.
!Disabled
Disable onboard LPT port.
!3BC/IRQ7
Enable onboard LPT port and address is 3BC/IRQ7.
! ! ! ! ! Parallel Port Mode
!SPP
Using Parallel port as Standard Parallel Port. (Default Value)
!EPP
Using Parallel port as Enhanced Parallel Port.
!ECP
Using Parallel port as Extended Capabilities Port.
!ECP+EPP
Using Parallel port as ECP & EPP mode.
! ! ! ! ! ECP Mode Use DMA
!3
Set ECP Mode Use DMA to 3. (Default Value)
!1
Set ECP Mode Use DMA to 1.
- 37 -
BIOS Setup
Advertisement
Table of Contents
