Table of Contents
Advertisement
!USB-HDD
!LAN
!Disabled
! ! ! ! ! Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is
40 tracks 720K, 1.2M and 1.44M are all 80 tracks.
!Enabled
!Disabled
! ! ! ! ! Password Check
!
System
!Setup
! ! ! ! ! CPU Hyper-Threading
!Enabled
!Disabled
! ! ! ! ! Init Display First
!AGP
!PCI
! ! ! ! ! Graphics Memory Size
!128MB
!Disabled
! ! ! ! ! Graphics Share Memory
!8MB
!1MB
GA-8GE800 Motherboard
Select your boot device priority by USB-HDD.
Select your boot device priority by LAN.
Select your boot device priority by Disabled.
BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
that BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are
all 80 tracks.
BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360K.
(Default value)
The system can not boot and can not access to Setup page will be denied
if the correct password is not entered at the prompt.
The system will boot, but access to Setup will be denied if the correct
password is not entered at the prompt. (Default value)
Enables CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported.
(Default value)
Disables CPU Hyper Threading.
Set Init Display First to AGP. (Default value)
Set Init Display First to PCI.
Driver use selected sized of system Memory for 3D Texturing to increase
graphics performance. (Default value)
Disable onboard graphics chip function.
Share 8MB system Memory preallocated for frame buffer. (Default value)
Share 1MB system Memory preallocated for frame buffer.
- 34 -
Advertisement
Table of Contents
