Jp2 (Bios Write Protection); Jp6 (Front Panel Usb Device Wake Up Selection) - Gigabyte GA-7VX User Manual

JP2 : BIOS Write Protection
JP6 : Front Panel USB Device Wake up Selection
1
Pin No.
ON Write Protect Enable
Write Protect Disable
OFF
(Default)
M Please Set Jumper JP2 to "Open" to enabled
BIOS Write Function when you update new
BIOS or new device
Pin No.
1-2 close FP USB Wake Up
2-3 close Normal (Default)
(If you want to use "USB Dev Wakeup From S3"
function, you have to set the BIOS setting "USB Dev Wake up
From S3" enabled, and the jumper "JP6" enabled).
*(Power on the computer and as soon as memory counting
starts, press <Del>. You will enter BIOS Setup. Select the item
"POWER MANAGEMENT SETUP", then select "USB Dev
Wakeup From S3: Enabled". Remember to save the setting by
pressing "ESC" and choose the "SAVE & EXIT SETUP"
option.)
18
Panel and Jumper Definition
Definition
1
Definition