Mb Intelligent Tweaker (M.i.t) - Gigabyte GA-7VT880 Pro User Manual

MB Intelligent Tweaker (M.I.T)

Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
DRAM Timing
x DRAM CAS Latency
x Bank Interleave
x Precharge to Active (Trp)
x Active to Precharge (Tras)
x Active to CMD (Trcd)
x RET to ACT/REF to REF (Trfc)
x ACT(0) to ACT(1) (Trrd)
CPU Ratio Control
Spread Spectrum Modulated
CPU Host Clock Control
x CPU Host Frequency (MHz)
PCI / AGP Frequency (MHz)
DRAM Clock
CPU Voltage Control
Normal CPU Vcore
AGP Voltage Control
DDR Voltage Control
higf: Move
Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power End-User use only!
DRAM Timing
Auto By SPD
Manual
DRAM CAS Latency
1.5/2/2.5/3
Bank Interleave
This feature allows user to select the DRAM access method.
4Bank /2Bank /Disabled Set DRAM access method to 4Bank/2Bank/Disanled(Default value:4Bank)
Precharge to Active(Trp)
2T/3T/4T/5T
Active to Precharge(Tras)
6T/7T/8T/9T
Active to CMD(Trcd)
2T/3T/4T/5T
RET to ACT/REF to REF(Trfc)
12T/13T/14T/15T
ACT(0) to ACT(1) (Trrd)
This feature allows user to select the ACT(0) to ACT(1) (Trrd), when any DRAM DIMM
installed.
2T/3T
CPU Ratio Control
This option will not be shown or not be available if you are using a CPU with the locked ratio.
5X~22.5X,Normal
MB Intelligent Tweaker (M.I.T)
[Auto By SPD]
2.5
4 Bank
3T
6T
3T
12T
2T
[Normal]
[Enabled]
[Disabled]
133
33/66
[By SPD]
[Normal]
1.600V
[Auto]
[Auto]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults F7: Optimized Defaults
BIOS will automatically setup the DRAM Timing by DRAM SPD data.
(Default value)
This item allows user to set DRAM Timing Manually.
Set DRAM CAS Latency time to 1.5/2/2.5/3(Default value:2.5).
Set Precharge to Active(Trp) to 2T/3T/4T/5T(Default value:3T)
Set Active to Precharge(Tras) to 6T/7T/8T/9T(Default value:6T)
Set Active to CMD(Trcd) to 2T/3T/4T/5T(Default value:3T)
Set RET to ACT/REF to REF(Trfc) to 12T/13T/14T/15T(Default Value:12T)
Set ACT(0) to ACT(1) (Trrd) to 2T/3T(Default Value:2T)
It depends on CPU Clock Ratio.(Default Value:Normal)
- 43 -
Item Help
Menu Level}
ESC: Exit F1: General Help
BIOS Setup