Pnp/Pci Configurations - Gigabyte GA-7VT880 Pro User Manual

PME Event Wake Up
Disabled Disable this function.
Enabled Enable PME as wake up event. (Default value)
ModemRingOn/WakeOnLAN (When AC Back Function set to [Soft-Off])
An incoming call via modem awakes the system from its soft-off mode. When set at Enabled,
an input signal comes from the other client.
Server on the LAN awaks the system from a soft off state if connected over LAN.
Disabled Modem Ring On / Wake On LAN function.
8Disabled
Enabled Modem Ring On / Wake On LAN function. (Default Value)
8Enabled
Resume by Alarm
You can set "Resume by Alarm" item at "Enabled" and key in data/time to power on system.
Disabled Disable this function. (Default value)
Enabled Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm :
Time (hh: mm: ss) Alarm :

PnP/PCI Configurations

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PCI 1/5 IRQ Assignment
PCI 2 IRQ Assignment
PCI 3 IRQ Assignment
PCI 4 IRQ Assignment
higf: Move
Enter: Select
F5: Previous Values
PCI 1/5 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
PCI 2 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
PCI 3 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
PCI 4 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
Everyday, 1~31
(0~23) : (0~59) : (0~59)
PnP/PCI Configurations
[Auto]
[Auto]
[Auto]
[Auto]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults F7: Optimized Defaults
Auto assign IRQ to PCI 1/5. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1/5.
Auto assign IRQ to PCI 2. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2.
Auto assign IRQ to PCI 3. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.
Auto assign IRQ to PCI 4. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 4.
- 41 -
Item Help
Menu Level}
Device(s) using this
INT:
Network Cntrlr
- Bus 1 Dev18 Func 0
Display Cntrlr
- Bus 1 Dev 0 Func 0
IEEE 1394 Host Cntrlr
- Bus 0 Dev20 Func 0
USB 1.1 Host Cntrlr
- Bus 0 Dev16 Func 1
USB 1.1 Host Cntrlr
- Bus 0 Dev16 Func 0
ESC: Exit F1: General Help
BIOS Setup