Fujitsu AUG12LVLB Design & Technical Manual page 5

10°C HEAT Operation
The room temperature can be set to go no lower than 10°C,
thus ensuring that the room does not get too cold when not occupied.
Caution)
• When the room temperature is higher than 10°C, "
temperature at 10°C when the temperature drops below 10°C.
• When " 10°C HEAT" operation stops, the room set temperature quickly returns to the preset temperature.
"10°C HEAT"
Button ON
20
°C
10
°C
Economy operation
The power consumption can be reduced.
FUNCTION SETTING
Outlet direction selection
• Performs operation matched to the number of outlets when 4 directions are unnecessary and
outlets are blocked when the ceiling cassette is installed in a corner, etc.
4-way direction 3-way direction
Ceiling switching function
Air reaches sufficiently up to 3m height, even it is compact cassette type.
Also delivers air to high ceilings by selecting the mode and raising the air flow according to the
height of the ceiling.
High ceiling (Mode 1)
3m
Standard ...Operates at normal air flow.
Mode 1 ...Air flow becomes greater than normal.
Cooling room temperature correction
Heating room temperature correction
Auto restart
The units restart automatically when the current was returned even when there was a power
interruption during operation.
*Only available with Wireless RC.
10°C HEAT" operation will not start. Operation starts and maintains the room
Indoor unit
operation START
4-way direction mode: Set when there are 4 outlets
3-way direction mode: Set when there are 3 outlets.
Standard ceiling (Standard)
2.7m
- (01 - 02) -
(shipped state).