Chapter 2 Hardware Installation Process - Gigabyte GA-7VT600-P User Manual

Chapter 2 Hardware Installation Process

To set up your computer, you must complete the following steps:
Step 1- Set Dip Switch (CK_RATIO) and system Switch (SW1)
Step 2- Install the Central Processing Unit (CPU)
Step 3- Install memory modules
Step 4- Install expansion cards
Step 5- Connect ribbon cables, cabinet wires, and power supply
Step 5
Step 4
Congratulations you have accomplished the hardware installation!
Turn on the power supply or connect the power cable to the power outlet. Continue with
the BIOS/software installation.
Step 2
Step 3
- 9 - Hardware Installation Process
Step 5
Step 1
Step 5