Gigabyte GA-7VAX User Manual page 42

FSerial ATA Function *
Select onboard Serial ATA chip function as RAID.(Default v alue)
8RAID
Select onboard Serial ATA chip function as BASE.
8BASE
FOnboard Serial Port 1
BIOS w ill automatically setup the port 1 address.
8Auto
Enable onboard Serial port 1 and address is 3F8,Using IRQ4. (Default v alue)
83F8/IRQ4
Enable onboard Serial port 1 and address is 2F8,Using IRQ3.
82F8/IRQ3
Enable onboard Serial port 1 and address is 3E8,Using IRQ4.
83E8/IRQ4
Enable onboard Serial port 1 and address is 2E8,Using IRQ3.
82E8/IRQ3
Disable onboard Serial port 1.
8Disabled
FOnboard Serial Port 2
BIOS w ill automatically setup the port 2 address.
8Auto
Enable onboard Serial port 2 and address is 3F8,Using IRQ4.
83F8/IRQ4
Enable onboard Serial port 2 and address is 2F8,Using IRQ3. (Default Value)
82F8/IRQ3
Enable onboard Serial port 2 and address is 3E8,Using IRQ4.
83E8/IRQ4
Enable onboard Serial port 2 and address is 2E8,Using IRQ3.
82E8/IRQ3
Disable onboard Serial port 2.
8Disabled
FUART Mode Select
MThis feature allow s y ou to determine w hich Infra Red(IR) function of Onboard I/O chip)
Using as IR and set to ASKIR Mode.
8ASKIR
Using as IR and set to IrDA Mode.
8IrDA
Using as standard serial port. (Default Value)
8Normal
Using as smart card Interface.
8SCR
FUR2 Dupl ex Mode(When UART Mode Select isn't set [Normal])
MThis feature allow s y ou to select the IR m odes.
IR Function Duplex Half. (Default Value)
8Half
IR Function Duplex Full.
8Full
" * " FOR GA-7VAXP Ultra Only.
KT400 Series Motherboard - 36 -