Table of Contents
Advertisement
Adjusting the Front Ride
Height
Owner-provided tools: spring-adjuster wrench,
Toro Part 139-4678; refer to your authorized Toro
distributor.
Important:
Make height adjustments only if there
is uneven tire wear or if you are adding additional
weight to the front of the machine (e.g., adding
a BOSS plow).
1.
If you are adding weight to the front of the
machine, adjust the ride height.
Check the tire pressure to ensure that the front
tires are inflated properly; refer to
Tire Pressure (page
The ground clearance should be 23 cm (9
inches) for standard wheels and tires or 25 cm
(10 inches) for the larger accessory wheels and
tires.
2.
If the ground clearance is not correct, use the
spring-adjuster wrench to rotate the collar on the
shock absorber to align the wheel
Note:
If the collar is difficult to rotate, raise the
front of the machine;
76).
Figure 105
1. Shock-absorber spring
2. Collar
Checking the
60).
(Figure
105).
Raising the Machine (page
3. Spring length
g364721
95
Advertisement
Table of Contents
