Plustek MobileOffice AD470 User Manual page 16

To scan multiple documents in a batch from the ADF can increase your work
efficiency and make large scanning tasks easier. The ADF of this scanner accepts a
variety of paper and stationery you may use in your daily work or personal life, such as:
 Normal paper whose size and ream weight meet the requirements stated in
"Appendix A: Specifications" of this guide.
 Notched paper
 Coated paper (e.g., brochure)
Attention
However, don't use the ADF to scan documents if they meet any of the following
conditions:
 Paper lighter than 50 g/m
 Paper with clips or staples attached
 Paper with inconsistent thickness, e.g., envelops
 Paper with wrinkles, curls, folds, or tears
 Paper with an odd (non-rectangular) shape
 Paper with static electricity
 Tracing paper
 Carbon paper, pressure sensitive paper, carbonless paper
 Items other than paper, e.g., cloth, metal foil.
To prevent paper feeding errors and damages to
the ADF unit, strictly follow the instructions below:
 Remove all small objects e.g., paper clips,
pins, staples or any other fasteners attached,
before loading the paper into the ADF.
 Make sure the paper is completely flat with no
creased or curled corners.
 Avoid scanning documents with pencil lead
and news print as they will make the ADF
exposure glass and the inner ADF dirty. If you
have to scan such paper, clean the scanner
frequently (refer to "Chapter III. Care and
Maintenance"
information).
 The paper for each batch scanned by ADF
can be of the same or different weights.
However, make sure the length of each scan
batch is the same.
2
(14 lb.) or heavier than 105 g/m
12
of this guide for
2
more
(28 lb.)