Disassembly Of Cd Servo P.c.b; Disassembly Of Motor Unit & Motor P.c.b - Panasonic SC-EN33PC Service Manual

9.10. Disassembly of CD Servo P.C.B.

· Follow the (Step 1) - (Step 3) of Item 9.4 - Disassembly of Rear Cabinet
· Follow the (Step 1) - (Step 2) of Item 9.6 - Disassembly of Main P.C.B. , Sensor P.C.B. & Tuner P.C.B.
· Follow the (Step 1) of Item 9.8 - Disassembly of Switch P.C.B. & Traverse Unit
· Follow the (Step 1) - (Step 4) of Item 9.9 - Replacement of Traverse Cover
Step 1 Desolder the terminal.
Step 2 Remove 3 screws.
Step 3 Flip the CD Servo P.C.B. over to one side.
9.11. Disassembly of Motor Unit & Motor P.C.B.
· Follow the (Step 1) - (Step 3) of Item 9.4 - Disassembly of Rear Cabinet
· Follow the (Step 1) - (Step 2) of Item 9.7 - Disassembly of Main P.C.B. , Sensor P.C.B. & Tuner P.C.B.
Step 1 Remove 3 screws.
Caution:
Keep the floating springs (x 4) in safe place & avoid losing
them.
Step 4 Detach FFC out from the connector.
Step 5 Attach a short pin to the unit.
Caution:
Insert a short pin into FFC of the optical pickup. [See "Handling
Precautions for traverse unit"].
23
SC-EN33PC