Table of Contents
Advertisement
Step 5 : Lift up the traverse unit to remove it.
9.24. Disassembly
P.C.B.
• Follow the (Step 1) - (Step 4) of item 9.4.
• Follow the (Step 1) - (Step 4) of item 9.5.
• Follow the (Step 1) - (Step 3) of item 9.6.
• Follow the (Step 1) - (Step 3) of item 9.7.
• Follow the (Step 1) - (Step 10) of item 9.10.
• Follow the (Step 1) - (Step 2) of item 9.11.
• Follow the (Step 1) - (Step 2) of item 9.12.
• Follow the (Step 1) of item 9.13.
• Follow the (Step 1) - (Step 11) of item 9.19.
• Follow the (Step 1) - (Step 4) of item 9.22.
• Follow the (Step 1) - (Step 5) of item 9.23.
Step 1 : Desolder the terminal.
Step 2 : Remove 3 screws.
Step 3 : Flip the CD Servo P.C.B. over to one side.
Step 4 : Detach FFC out from the connector.
Step 5 : Attach a short pin to the unit.
Caution : Insert a short pin into FFC of the optical pickup.
[See "Handling Precautions for traverse unit"]
52
of
CD
Servo
Advertisement
Table of Contents
