Gigabyte GA-6VM7A+ User Manual page 45

Boot From LAN First
Enabled Enable Boot From LAN First.
Disabled Disable Boot From LAN First. (Default Value)
Auto Auto detect Boot From LAN First.
You can set "Auto" or "Enabled" to boot from LAN first.
Boot Sequence
This category determines which drive computer searches first for the disk operating
system (i.e., DOS). Default value is A, C, SCSI.
X1, X2, X3 System will first search for X1 disk drive then X2 disk drive and then
X3 disk drive.
VGA Boot From
PCI Slot System will boot from PCI slot VGA card.
AGP System will boot from AGP display card. (Default Value)
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K
type is 40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks.
Note that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as
they are all 80 tracks. (Default Value)
Disabled BIOS will not search for the type of floppy disk drive by track number.
Note that there will not be any warning message if the drive installed is
360 K.
Boot Up NumLock Status
On Keypad is number keys. (Default Value)
Off Keypad is arrow keys.
Memory Parity/ECC Check
Enabled Enabled Memory Parity/ECC Check Function.
Disabled Disabled Memory Parity/ECC Check Function. (Default Value)
38
BIOS Setup